Investigation of Switching Behavior of Microstrip Triangular Patch Antenna through Neural Network

  IJCTT-book-cover
 
International Journal of Computer Trends and Technology (IJCTT)          
 
© 2017 by IJCTT Journal
Volume-48 Number-3
Year of Publication : 2017
Authors : N K Saxena, R.K. Verma, N. Kumar, P.K.S. Pourush1
DOI :  10.14445/22312803/IJCTT-V48P124

MLA

N K Saxena1, R.K. Verma, N. Kumar, P.K.S. Pourush "Investigation of Switching Behavior of Microstrip Triangular Patch Antenna through Neural Network". International Journal of Computer Trends and Technology (IJCTT) V48(3):118-122, June 2017. ISSN:2231-2803. www.ijcttjournal.org. Published by Seventh Sense Research Group.

Abstract -
Switching behavior of microstrip equilateral triangular patch antenna printed on ferrite substrate is investigated using general artificial neural network (ANN) analysis. Using ferrite as substrate with applied external magnetic field perpendicularly, microstrip antennas offered switchable behavior due to negative permeability constant which causes extraordinary wave decaying or attenuating. In this communication the study of negative permeability and external magnetic field which are only responsible for this switching behavior is done with help of ANN. Both synthesis and analysis are mainly focused on the switchabilty of antenna. In this work Radial Basis Function (RBF) networks is used in ANN models. Synthesis is defined as the forward side and then analysis as the reverse side of the problem. Here the analysis is considered as a final stage of the design procedure, therefore the parameters of the analysis ANN network are determined by the data obtained reversing the input-output data of the synthesis network. In the RBF network, the spread value was chosen as 0.01, which gives the best accuracy. RBF is trained with 100 samples but tested only for particular cutoff 15 samples.

References
[1] Pozar D.M. (1992). Radiation and Scattering Characteristic of Microstrip Antenna on Normally Biased Ferrite Substrate. IEEE Trans., 40, 1084-1092.
[2] Dixit L., Pourush P.K.S., et al. (April 2000). Radiation characteristics of switchable ferrite microstrip array antenna. IEE Proc. Microw. Antennas Propag., 147 (2).
[3] Saxena N.K., Khan A., Pourush P.K.S and Kumar N. (2009). Neural Network Analysis of Switchability of Microstrip Rectangular Patch Antenna Printed on Ferrite Material. International Journal of RF and Microwave Computer-Aided Engineering, 20(1), 1-5.
[4] Sa?g?ro?glu S., G¨uney K. and Erler M, (1998). Resonant frequency calculation for circular microstrip antennas using artificial neural networks. International Journal of RF and Microwave Computer-Aided Engineering, 8(3), 270-277.
[5] Karabo?ga D., G¨uney K., Sa?g?ro?glu S. and Erler M. (April 1999). Neural computation of resonant frequency of electrically thin and thick rectangular microstrip antennas. Microwaves, Antennas and Propagation, IEE Proceedings, 146(2), 155 – 159.
[6] G¨uney K., Sa?g?ro?glu S. and Erler M. (Jan. 2002). Generalized neural method to determine resonant frequencies of various microstrip antennas”, International Journal of RF and Microwave Computer-Aided Engineering, 12(1), 131-139.
[7] Balanis C. A. (1997). Antenna Theory. John Wiley & Sons, Inc.
[8] Sodha M.S. and Srivastav N.C. (1981). Microwave Propagation in Ferrimagnetics. Plenum Press, New York.
[9] Pourush P.K.S. and Dixit L. (1998). A 2x2 Element Planar Phased array of Circular Microstrip Antenna on Ni-Co Ferrite Substrate at 10 GHz. International Journal of Ratio & Space Physics, 27, 289-226.
[10] Pourush P.K.S. et al. (2000). Microstrip Scanned Array Antenna on YIG Ferrite Substrate. Proc. International Symp. on Antennas and propagation, Japan.
[11] Kumar Dheeraj and Pourush, P.K.S. (Dec. 2004). Circularly Polarized Microstrip Triangular Array on Normally Biased Yttrium Ferrite. Proceedings of Asia Pacific Microwave Conference, pp.856 New Delhi.

Keywords
Microstrip antennas, switchability, ferrite material, artificial neural networks, reverse modeling.